How Can We Help
If you need any helps, please feel free to contact us.
+91 72020 99697
info@perfectagni.com
Download Brochure
Premium Fire Protection Mastik Coating
Leading provider for premium, water-based, and cable-safe Ace Mastik Coating supply and application service. This proven coating protects electrical cables and mechanical surfaces from fire, expanding into an ablative char layer that delays flame spread. Our solutions combine halogen-free formulation with rigorous testing standards to deliver unmatched reliability and performance for all types of facilities.
What Is Ace Mastik Coating?
Ace Mastik Coating is a water-based intumescent coating applied directly to electrical cables, cable trays and mechanical surfaces. When exposed to heat, the coating expands and chars, forming an insulating barrier that slows fire spread and protects critical infrastructure without derating cable capacity.
01.
No Cable Derating
Preserves full cable capacity while adding fire protection to the surface.
Ablative Fire Protection
Expands and chars under heat, absorbing energy and delaying flame spread.
Certified Application
Applied by trained technicians using brush, roller or spray equipment.
Halogen & Asbestos Free
Formulated without hazardous halogen or asbestos content for safe use.
Specification
- Water-based, low-VOC formula
- Service temperature -20°C to 90°C
- Touch dry in 2 hours
- Coverage approx. 1–1.5 m²/litre
- Halogen & asbestos free
- Full compliance documentation
Technical Specifications
| Parameter | Detail |
|---|---|
| Application Temperature | 5°C to 40°C for correct curing |
| Service Temperature | -20°C to 90°C continuous |
| Drying Time | Touch dry in 2 hours, full cure in 24 hours |
| Coverage | Approximately 1-1.5 m² per litre depending on application |
| Shelf Life | 12 months in original unopened container |
Our Process
- Surface Preparation: Ensure surfaces are clean, dry and free from oil or grease.
- Mixing & Preparation: Stir the coating thoroughly and dilute per manufacturer instructions.
- Application: Apply using brush, spray or roller equipment between 5°C and 40°C
- Curing & Inspection: Allow proper drying time and check coverage before final inspection.
Industry Applications
01.
Electrical Cables
Power, control and communication cables needing fire protection.
Mechanical Penetrations
Cable trays, pipe penetrations and service entries.
HVAC Systems
Air ducts and ventilation surfaces requiring fire protection.
Structural Elements
Steel and mechanical protection elements in critical infrastructure.